So I have an LG, and when it dies and I turn it back on, all i get is this
the blue led is blinking and half the screen is black and the other half is just some colored pixels. (low quality pic sorry) so how do i fix this?
Questa è una buona domanda?
Rep: 1,2k
5
3
You will need to get the whole screen replaced more than likely. however sometime though very rarely the ribbon cable for the screen shifts off the board and you get this type of issue. either way you need to open u the phone and look and try reseating the ribbon cable. if that doesn’t work you just need a new screen and honestly the disassembly is the hardest part.
you will also need to get some double sided tape I like to use the non conductive type and you can get a set of 4 rolls of various widths from amazon.
Questa risposta è stata utile?
Ultime 24 Ore: 1
Ultimi 7 Giorni: 4
Ultimi 30 Giorni: 6
Tutti i Tempi: 215
3 Commenti
It appears that you have a dead screen. Have you dropped your phone without a case before this happened?
da Repair Skeleton
no it's a hand me down
da superiormemer
Ah, well, You probably just need a new screen. You can find parts on iFixit and amazon.
da Repair Skeleton