Rep: 25
1
Mark, I am hoping you found a better solution than scrapping it. I have an LG 65EG9600 Curved OLED TV and have loved it till I had similar problems. Remote control only on and off and half would be have flashing greyed overlay on exactly 1/2 of the screen. See video attached.
Questa è una buona domanda?
Rep: 785,2k
1,1k
895
2,3k
@stevegowdy excellent to add images right from the beginning. Those errors are caused by errors on the LCD driver board. That is the board that is attached to the LCD panel via some very fine ribbon cables. There are certain things that could be checked if we have the number of the LCD driver board. It will not be in any service manual etc. but possibly in the LCD display datasheet. If you disassemble your unit and can get to the board post some really good pictures of it with your QUESTION. We can try and see if the datasheet etc. will be available. This is an extensive repair which will involve some rather intricate testing and soldering but can be done.
Questa risposta è stata utile?
Thanks Old Turkey. I’ll try and open it up later today and get some pictures to post. I have also read about Re-adjusting the cables just incase they have been bumped out of position and are not getting proper connection. Thanks.
@stevegowdy yes, anything needs to be looked at with errors like that. For the cables, disconnect them and check the ends for corrosion etc. Reseated all the cables including the once going to the panel. Let us know how it works out.
Ultime 24 Ore: 0
Ultimi 7 Giorni: 0
Ultimi 30 Giorni: 0
Tutti i Tempi: 36
