Salta al contenuto principale

Right Joy Con rail connector pin connection

If bought a faulty Joy Con where both connectors to the rail of the joy con where missing, when i soldered the right connector back on the board I noticed that one of the pads is ripped of the board and I can not find out where it should connect to so I can run a wire.

I connected the joy con to the switch with the missing pad and it is detected by the switch, can be charged and is overall working but regardless if it is docked or not the switch will show it as wireless connected.

Block Image

Block Image

Block Image

Block Image

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
Aggiungi un commento

1 Risposta

Can you get any better photos of this damage. I am not seeing any damage

Questa risposta è stata utile?

Punteggio 0


I updated my questions with some additional photos where the connector is removed.


Aggiungi un commento

Aggiungi la tua risposta

Sontha sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 9

Tutti i Tempi: 176