When I select the hot cycle on my Kenmore Elite 796.29272900, it fills up warm. I have disconnected the hot hose at the wall and ran the water into a bucket and it is hot.
Thanks for your help.
Questa è una buona domanda?
Rep: 784,8k
1,1k
894
2,3k
@dwhome close off the cold water supply and see if it now fills with hot water. This sounds like a water inlet valve issue but could be thermostat/sensor issue. It may also be a cycle issue. Try to select something like Normal/Casual cycle and then select hot to see if that changes.
Questa risposta è stata utile?
Ultime 24 Ore: 0
Ultimi 7 Giorni: 0
Ultimi 30 Giorni: 3
Tutti i Tempi: 54
