micro solder part for finger print reader Pixel3XL

Question

Google Pixel 3 XL

Google's third-generation Pixel-branded smartphone, and their first "notched" phone. Comes with a 6.3" QHD+ OLED display and 64 or 128 GB of storage. Available in Nearly White, Just Black, or Not Pink.

77 Domande Visualizza tutte

phillip lvov @philliplvov

Rep: 25

1

Postato: 24 lug 2020

Opzioni

micro solder part for finger print reader Pixel3XL

I am having trouble sourcing the connector that is soldered onto the motherboard for the finger print reader. The one that has the black flap to lock the ribbon cable in place. if anyone could assist where i could find this part it would help greatly. thank you

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No

Punteggio 2

Aggiungi un commento

2 Risposte

Chris Stables @imicrosoldering Rep: 50,7k 8 14 101 · Answer 1 · 2020-07-24T20:17:15-07:00

Risposta Più Utile

Chris Stables @imicrosoldering

Rep: 50,7k

8

14

101

Postato: 24 lug 2020

Opzioni

If you cannot source one from another board I would suggest searching Digikey and Mouser. They should have something that’s compatible.

Questa risposta è stata utile?

Sì No

Punteggio 2

1 Commento:

Can anyone describe the process of sourcing the fingerprint connector from the Pixel 3Xl. I would prefer to source it from one of my broken 3xl's than to find and pay some minimum rate for it to be micro soldiered. Is the connector on a board that I can removed my from for parts phone and replaced on my repairable phone?

7 giu 2021 da Shawn Hampton

Aggiungi un commento