Aggiusta la tua roba Comunità Store

Second generation of CDMA iPad 2 with 16, 32, or 64 GB and Dual Core A5 Processor. Model Number A1397. Repair is detailed and requires heat and prying.

52 Domande Visualizza tutte

Opzioni

I replaced the screen on iPad 2 and I received a Black screen!

Block Image

I replaced the screen in iPad 2,3.

After that I received a black screen.

The screen is completely black as when is off.

when I turn it I have the same screen. I don’t have illuminated light. Black complete as when is off!

i checked the LCD is working with another iPad so it’s not the LCD. Also I opened the motherboard and I saw that

I there is a blown fuse. Please took a look the picture.

Can we say that this fuse was blown??? Could somebody confirm it?

could be if I replace it will began to work????

Any suggestions will be highly appreciated!

thank you

Vinnie Venkov

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 0
Aggiungi un commento

1 Risposta

Filtra per:
Più utili Più recenti Più Vecchio

Opzioni

No picture. Did you disconnect the battery before you unhooked the lcd and digitizer? It sounds like you shorted the backlight circuit.

Questa risposta è stata utile?

Sì No
Punteggio 0

1 Commento:

Thank you Allan. Also I"m sorry for the picture, now You can see it. I had a problem to upload the picture thats why wasn't there. So do you thing this could be a problem on the picture. Also pls give advise if You know where I can buy all those small parts fuse, transistors etc, if You know. Thank You so much for Your help!!!

da

Aggiungi un commento

Aggiungi la tua risposta

Vinnie sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 8

Tutti i Tempi: 47