Aggiusta la tua roba Comunità Store

Modelli A1419 / Fine 2012 / Processori 2.9 & 3.2 GHz Core i5 o 3.4 GHz Core i7, ID iMac13,2

330 Domande Visualizza tutte

Opzioni

Screen stuck on Low Resolution

Hi.

Video card is GeForce GTX 660M (if needed).

Upgraded HD to SSD and decided to refresh Thermal Paste as computer is 8 years old and hasn’t been open (screen adhesive seems to be original). Now screen resolution is at 1280x720, everything is pixelate. Even Apple logo on startup. Going to System Preferences - Display shows Only resolution mentioned above. No Other Resolutions are listed.

Did I somehow damage Video card by reapplying Thermal Paste? I work in computer repair shop so have done it zillion times.

Thank you for taking a look.

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 0
Aggiungi un commento

2 Risposte

Filtra per:
Più utili Più recenti Più Vecchio
Risposta Più Utile

Opzioni

Did you try running diagnostics?

Restart your system and press the D key to enter

Reference: Mac startup key combinations

Questa risposta è stata utile?

Sì No
Punteggio 1

3 Commenti:

Diagnostics won’t run, it won’t even start (held D key for solid 2 minutes). Just white screen. Recovery - loads, OS - loads and works, Diagnostic - won’t.

da

@onetailbeast - Try using a USB keyboard

da

Was using USB keyboard.

da

Aggiungi un commento

Opzioni

Had the same problem. Tried everything from reinstallation, resetting PRAM, SMC, etc. Been on call with Apple support for a half an hour. Unable to run diagnostic, not even remotely or from a flash disk. Nothing helped. Brought the iMac to an authorised service centre here in Brno, CZ and they quoted me €700 for a new LCD. Which is a basically price of the whole iMac…

Questa risposta è stata utile?

Sì No
Punteggio 0
Aggiungi un commento

Aggiungi la tua risposta

onetailbeast sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 685