HDMI PIN 18 issue

Question

PlayStation 4

Una console di gioco per la televisione prodotta da Sony Computer Entertainment, conosciuta anche come PS4. Annunciata il 20 febbraio 2013 e lanciata sul mercato il 15 novembre 2013.

1700 Domande Visualizza tutte

Martin Jančík @marcinn

Rep: 61

3

2

Postato: 1 apr 2020

Opzioni

HDMI PIN 18 issue

Hello everyone,

I bought PS4 with faulty HDMI port to fix it, learn something and get some practise. I am now waiting for my new HDMI port, but I have noticed something on the bord. As I checked conductivity between PADs and points from the diagram, I found, that PIN 18 is not connected to the capacitor on the right side(18).

I have also noticed that the back side of the diode and capacitor(Yellow dots) are connected and both shorted to ground.( Front side of the diode and capacitor Is connected too, but not shorted to ground.) Is that right ? I dont have another board to compare with. And if yes, where does PIN 18 go? Could that be an Encoder IC fault?

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No

Punteggio 5

3 Commenti

@marcinn ..please list which board you have for further diagnostics help

1 apr 2020 da jostewcrew

Where can I get that? Theres SAB-001 on motherboard, Is that it?

1 apr 2020 da Martin Jančík

https://www.youtube.com/watch?v=8Gi6B-ua... Watch this

16 giu 2021 da mohamad_Faisal

Aggiungi un commento

8 Risposte

@marcinn ..please list which board you have for further diagnostics help — jostewcrew
Where can I get that? Theres SAB-001 on motherboard, Is that it? — Martin Jančík

jostewcrew @jostewcrew Rep: 2,2k 6 4 1 · Answer 1 · 2020-04-01T05:48:28-07:00

Risposta Più Utile

jostewcrew @jostewcrew

Rep: 2,2k

6

4

1

Postato: 1 apr 2020

Opzioni

martin … for sab-001 follow this pinout.

https://www.youtube.com/watch?v=KTQ5JkaL...

skip to the end for the testing points. if it doesnt match, theres a fault. post back for further assistance.

Questa risposta è stata utile?

Sì No

Punteggio 1

10 Commenti:

Yes, the PIN doesnt match the video

1 apr 2020 da Martin Jančík

youll want to remove the component that doesnt match and test out of circuit. if it tests good, place it back and continue. something is shorted. it could very well be the hdmi contoller. i would start there and recheck the pinouts.

1 apr 2020 da jostewcrew

Okay, I am gonna try that, thank you

1 apr 2020 da Martin Jančík

@jostewcrew so I have desoldered the diode and capacitor and noticed, that I have 3 pins on the HDMI controller (firts 3 from the left side behind the HDMI filters) shorted together. Dont you know where they should connect ? And when I removed the components, the pin Now connect to the right place

1 apr 2020 da Martin Jančík

Sorry, not only First 3, also some that Are connected to HDMI filters are shorted with first 3 pins

1 apr 2020 da Martin Jančík

Mostra altri 5 commenti

Aggiungi un commento

Piotr @pitkox Rep: 1 · Answer 2 · 2020-08-01T09:51:24-07:00

Piotr @pitkox

Rep: 1

Postato: 1 ago 2020

Opzioni

Hi, I have the same problem, maybe someone could give us feedback about value of this cap and diode from working MB. For me its 1,5 Ohms from the left side of thie components.

Thank you!

Questa risposta è stata utile?

Sì No

Punteggio 0

Aggiungi un commento