Salta al contenuto principale

Modello A1312 / metà 2011 / Processore Core i5 da 2,7 e 3,1 GHz o Core i7 da 3,4 GHz, ID iMac12,2

710 Domande Visualizza tutte

Looking for Mid 2011 27" iMac Adhesive Strips

I have looked everywhere for the adhesive strips for remounting the glass. Is there a substitute or a recommendation that anyone has for this. It doesn’t seem like anyone has the strips for a mid-2011. Will the 2012 strips work? Thanks!

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
Aggiungi un commento

1 Risposta

Soluzione Prescelta

There is no adhesive strips for the 2011 and older models! These older series use magnets to hold the cover glass on.

Review this guide: Installazione del display nell'iMac Intel EMC 2429 da 27" Note in step 2 the use of suction cups to gasp the cover glass to gently pull it away from the case (magnetic attraction force holds it on), the glass has metal plates glued to it along the top and sides on the inside surfaces meeting up with the rare earth magnets on the display panel which is screwed into the case.

Questa risposta è stata utile?

Punteggio 2

1 Commento:

Thanks Dan! Very helpful.

da

Aggiungi un commento

Aggiungi la tua risposta

Brian McManus sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 4

Tutti i Tempi: 254