Aggiusta la tua roba Comunità Store

Released in June 2017 as a successor to the Surface Pro 4. Also known as Microsoft Surface Pro 12.3". Model number: FJT-00001.

51 Domande Visualizza tutte

Opzioni

Screen flicker after microsoft logo then goes black.

was doing a battery replacement and after i got the screen off i wanted to check everything was ok so i booted it up and it would post the microsoft logo, then flicker some little white squares above the logo in a line. then goes black. Hooked up to a monitor with the mini display port and its running fine on there. does this mean the screen is broken, even tho it still shows the logo for a sec?

Update (06/05/2019)

also the touch screen even works when its a black screen, i can see my fingers interacting with stuff on the monitor hooked up through mini display port

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 0
Aggiungi un commento

1 Risposta

Filtra per:
Più utili Più recenti Più Vecchio
Risposta Più Utile

Opzioni

If the screen still exhibits some functionality, then perhaps it wasn’t re-attached properly? Try carefully re-attaching it one more time to see if there’s a difference.

Questa risposta è stata utile?

Sì No
Punteggio 1

4 Commenti:

yes I have several times. no luck.

da

what do you think the odds are that its something in the display compared to the main board? I am thinking about ordering a new display but I dont wanna waste my money.

da

If you hooked up a monitor to the mini Display port and it worked fine from there, then most likely the problem is the display on the Surface Pro and not the motherboard.

da

ok, thanks for your help Dan.

da

Aggiungi un commento

Aggiungi la tua risposta

Blake sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 470