Salta al contenuto principale

Introdotto il 19 settembre 2014, questo iPhone con schermo da 4,7" è la versione più piccola dell'iPhone 6 Plus. Identificato dai numeri modello A1549, A1586, and A1589.

4994 Domande Visualizza tutte

Power button in good shape but acts like if it were stuck

Good evening to all!

My iPhone 6 suddenly started acting like if its power button is being pressed (or stuck) when it isn’t. When phisically pressed, it randomly responds, with most of the time not responding. At any moment, without any action from me, shows the turn off slider in the same way that would appear normally if the power button is keep pressed. If I turn it off, then it keeps showing the apple logo repeatedly (bootloop), just as if it were about to start, but it never starts until I plug it to its charger or to my laptop.

However, when I plug it to the charger or to the laptop, it behaves normal. The button becomes phisically responsive again and it stops showing the turn off slider. When I disconnect it, it returns to the same odd behavior. Due to this, I tought it could be a software problem, but I have already installed the latest iOS update and it keeps acting odd.

It could really be a hardware problem or it is a software problem?

Thank you all in advance!

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
2 Commenti

have you had your screen replaced lately?

da

No. I got this used phone two months ago and it was in good condition, but I cannot say anything if it had any inspection or repair in the past.

I know that I could maybe get no solution since I didn't find any related post on this problem in this or any other site. I would like at least to have clues so I know what can I look after when I take it to some technical support.

Thank you!

da

Aggiungi un commento

2 Risposte

Soluzione Prescelta

It sounds like you need replacing the power button connecting cable that includes the physical part that clicks when you put pressure..for one reason or another seems to be damaged. You can follow this guide to get yourself an idea if you feel like doing it yourself:

Sostituzione gruppo cavo pulsante di accensione iPhone 6

Questa risposta è stata utile?

Punteggio 2
Aggiungi un commento

first I`d check for water damage, clean with isopropynol and a tooth brush is you find any signs, then if its still acting up try a new power button flex(just hang it in) and see if the issue is sorted.

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

Aggiungi la tua risposta

luis.jaramillo sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 6

Tutti i Tempi: 276