Rep: 1
1
Hello.
Following the instructions here on Ifixit, I replaced the DC in board. I put all the parts back in place, made the connections and finally connected the power. I forgot to turn down a flap at the fan connection, also forgot about the power and caused a short with a tweezers. I replaced this part successfully back in 2017.
The Mac is now dead, does not turn on.
How severe is the damage?
Thanks
Questa è una buona domanda?
Rep: 685,3k
3,4k
1,1k
2,6k
Please post a photo of the area you shorted out.
It’s most likely repairable by a professional with micro soldering skills and the diagnostic skills to do so. Also a good microscope and electrical diagram.
Right off the bat I’d recommend Minho @refectio https://www.ifixit.com/Business/10741/Re... or
Louis Rossman, https://store.rossmanngroup.com
Questa risposta è stata utile?
Ultime 24 Ore: 0
Ultimi 7 Giorni: 2
Ultimi 30 Giorni: 2
Tutti i Tempi: 66
