Rep: 25
1
The water line broke near the hinge in the Freezer door and I need to replace. I removed the face plate of the dispenser, removed the circuit panel, removed plastic cover , removed the 12 screws around the dispenser unit. However the unit will not come out it appears to be still attached somehow. I can’t find any more screws that need to be removed.
Questa è una buona domanda?
My line broke right under the freezer door where it curves. I tried to pull it out to put a connector on, but it broke off. I wound up getting an elbow from Home Depot where one end was able to be pushed into the water line. The elbow had a connector which I was able to use some tubing to connect to the main water line, but I had to add a reducer connector to the main water line to make it work.
Now my flab in the ice chute is broken and I am trying to get the façade off. I did find one little slot on the bottom left and i used a small screw driver and have the left bottom side off. Going back to get the whole thing off - hope its not too hard.
Questa risposta è stata utile?
Ultime 24 Ore: 3
Ultimi 7 Giorni: 7
Ultimi 30 Giorni: 19
Tutti i Tempi: 233
https://www.bosch-home.com/us/en/product...
Looking at the replacement door part, it come with the bit water line coming out the bottom so I'm assuming it's not meant to be repaired. Never buying Bosch again.
da ougihaeoru