Kenmore french-door refrigerator (model 2537034341B) ice cubes too big
Hi,
My Kenmore french-door refrigerator (model 2537034341B) has an ice maker built in to the main refrigerator cabinet, separate from the freezer. I have noticed that recently my ice dispenser stopped dispensing ice. I can hear the auger turning and just small pieces/crumbs of ice come out. After removing the ice container and manually operating the auger observed that the pickup barrel at the front end of the auger was not able to get ice cubes in it. Then I saw that this was because they were too big to fit in the openings on the barrel. I took a closer look at the cubes and it appears that the ice maker is overfilling the ice cube tray. I have read that some ice makers have the ability to adjust the cube tray fill time. Is there any way to adjust the water level on this ice maker? Maybe an option would be to reduce the water pressure to the ice maker?
I have also tried to “reset” the ice maker hoping it will recalibrate but I don’t have any results to report yet.
Update (11/26/2018)
I tried to reset the icemaker by disabling it from the fridge controller and then unplugged power from the fridge for 5 mins, and then turned the icemaker back on. This did not resolve the issue.
Icemaker parts reference diagram:
Questa è una buona domanda?