Salta al contenuto principale

Model A1181: 1.83, 2, 2.1, 2.13, 2.16, 2.2, or 2.4 GHz Core 2 Duo processor

1488 Domande Visualizza tutte

New logic board - System Serial Number

I installed a New logic board with your Ifixit instructions and it works perfectly. However when I go to Hardware Overview the System Serial Number shows "SystemSerialNumb". My question is how do I place my machine SN in place of this message?

To clarify, I am thinking that the serial number shown in hardware overview is the machine sn and not the logic board sn. This is what my other Macs show.

Thank you for your reply.

Risposto! View the answer Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 1
Aggiungi un commento

1 Risposta

Soluzione Prescelta

Showing of "SystemSerialNumb" is normal when the Logicboard has replaced. Normally an AASP would write the original Serialnumber from the Notebook back to the SN Rom in the Logicboard. In your case there is no solution for that. But normaly it is not necessary at all.

Questa risposta è stata utile?

Punteggio 1
Aggiungi un commento

Aggiungi la tua risposta

dunamis7 sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 3,140