Aggiusta la tua roba Comunità Store

The Nintendo DSi is the third iteration in the Nintendo DS line, and made its debut in Japan in late 2008.

263 Domande Visualizza tutte

Opzioni

Where do I start with this DSi repair/rebuild?

I recently tried repairing a water damaged DSi, but gave up on it due to lack of knowledge. Now, I want to return to it, but I haven’t got a clue where to start! I’ve disassembled quite a bit of it, and I don’t know what to replace, what to keep, or where anything goes. There are some things I am sure I need to replace, and I already have a replacement motherboard and battery. Can anyone steer me in the right direction?

Parts I’m sure I need to replace:

Block Image

Parts I hope I can still use but am unsure about:

Block Image

Parts that I am sure I can reuse:

Block Image

If you need absolutely any more information, I will be happy to provide anything you may need to help. This is the first time I have ever touched the forums here, so if I did anything wrong in terms of convenient formatting, tell me. Thanks!

-Dawn de Era

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 1
Aggiungi un commento

1 Risposta

Filtra per:
Più utili Più recenti Più Vecchio
Risposta Più Utile

Opzioni

Hi!

Welcome to our forums.

Before replacing anything, I would first clean all components with 90%+ isopropyl alcohol (like this one) and some Q-tips. Make sure to remove the corrosion (or gunk in general) where ever you see it. Then I would reconnect the parts without using any screws, just to see if it’s working and what’s broken.

I would however avoid using that battery since it’s been water-damaged (link to replacement). Another thing I am worried about is the power board (the one from the 1st pic) and the motherboard.

Use out teardown guide if you need more help with disassembly/ assembly: Nintendo DSi Teardown

And keep me posted of you need more help.

Questa risposta è stata utile?

Sì No
Punteggio 4

2 Commenti:

The motherboard and battery are both spares, so they're fine. The power board I definitely have to replace. Thanks for the tip about cleaning the corrosion, though! I will definitely keep that in mind! Also, where would I find a replacement power board? I would have tested the one I had, but it was bent and I had accidentially snapped the ribbon cable.

Thanks for the help, though!

da

Hi!

I've seen one on Amazon: https://amzn.to/2zOzh2C

da

Aggiungi un commento

Aggiungi la tua risposta

Dawn de Era sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 9

Tutti i Tempi: 109