Salta al contenuto principale

Released September 22, 2017. Model A1863, A1905. Available as GSM or CDMA / 64 or 256 GB / gold, silver, and space gray.

218 Domande Visualizza tutte

Rarely booting up (Physical drop damage)

Hey,

I have recently purchased a damaged Iphone 8, which wasn’t supposed to turn on. I noticed that the battery connection was bad, so I replaced it. The phone automatically attempted to turn on several times with approximately 30 seconds to 1 minute apart, until it successfully boot up. When turned on, the phone works perfectly. The screen and the home button has been replaced (With the home button not being functional of course).

If anyone have any advice how to investigate further on the logic board or any solution on the problem, it’s much appreciated.

Thanks in advance,

Kevin.


Risposto! View the answer Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
Aggiungi un commento

Kit riparazione batterie MacBook

A partire da $69.99

Buy Now

Kit riparazione batterie MacBook

A partire da $69.99

Buy Now

2 Risposte

Soluzione Prescelta

Have you done a full functional test of the phone? I mean every singles camera, flash, sensor, button, microphone etc.

If the phone is taking longer than usual to boot or needs several attempts, that is usually an indication that something in the boot process is holding things up. That could be caused by a faulty or partially faulty peripheral function. So the first thing to do is to test everything out. If something doesn’t work, then that’s where you would want to explore a parts replacement. Once known-good parts fail to resolve an issue, that’s when you can consider a logic board level issue.

Questa risposta è stata utile?

Punteggio 2
Aggiungi un commento

Try doing a restore through iTunes

Questa risposta è stata utile?

Punteggio 1

Commenti:

I have already tried that, where the phone boots up perfectly right after the restoration, however, If you attempt to boot up the phone after it has been shut off, it will not work.

da

Originally, was the battery connector, or the battery replaced? If you replaced the connector try replacing the battery as well. It may be a voltage issue.

da

I have only changed the battery, but the connecter on the logic board have seen better days before as well.

da

Aggiungi un commento

Aggiungi la tua risposta

Kevin Pielak sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 4

Tutti i Tempi: 50