Rep: 1
1
1
I had to replace the lightening connector assembly for an iPhone 7. Now when I connect the battery to the logic board the phone will only boot once. If I power it down and try to boot again I get the white screen with black logo. If I disconnect the battery connector and let it sit for a while then the phone will boot again but only once. Any ideas.
Questa è una buona domanda?
Rep: 221,5k
15
290
807
That’s an odd problem…
I would try another Lightning flex to see if that solves the problem. I would also encourage you to double check the work you did in case you accidentally damaged or dislodged some components.
Questa risposta è stata utile?
I've tried a new flex cable and a new battery. Same result. I unplug the battery flex and let the phone sit for a bit then it will boot. I shutdown and try to do a cold boot and WSOD. Leads me to a cap issue on the logic board....
Tried a new flex and new battery. Problem still is the same. I disconnect the battery for a while and I can turn on the phone. I try to cold boot it after a shutdown and I get WSOD. Seems like a CAP issue on the logic board.
Ultime 24 Ore: 0
Ultimi 7 Giorni: 1
Ultimi 30 Giorni: 3
Tutti i Tempi: 33
