Touch ID Issues After Panel Replacement (Original Home Button)

Question

iPhone 6

Introdotto il 19 settembre 2014, questo iPhone con schermo da 4,7" è la versione più piccola dell'iPhone 6 Plus. Identificato dai numeri modello A1549, A1586, and A1589.

4994 Domande Visualizza tutte

Daniel Kapeller @danielkapeller

Rep: 1

1

Postato: 20 lug 2018

Opzioni

Touch ID Issues After Panel Replacement (Original Home Button)

I replaced a front assembly on my iPhone 6, and transferred the original home button, but Touch ID would not activate, but the home button would remain working. However, it work work again if I transferred the home button back to my old screen. I was sure that meant the front panel was defective.

iFixit sent me a new one, but the issue is happening yet again on this assembly. Once again, I transferred my home button to the original assembly and it worked, so the home button is not damaged. Is this another defective panel, or is it something else causing Touch ID issues.

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No

Punteggio 0

Aggiungi un commento

1 Risposta

Aminur Rouf @nextgentech Rep: 429 3 · Answer 1 · 2018-07-20T17:05:55-07:00

Risposta Più Utile

Aminur Rouf @nextgentech

Rep: 429

3

Postato: 20 lug 2018

Opzioni

there is a metal plate behind the LCD which has a flex cable running down it. i recommend you should use the metal plate from the original screen instead of the new one as this sometimes creates problems with touch id function.