Salta al contenuto principale

Il G4 Quicksilver può avere le seguenti configurazioni: - Single 733 MHz (Quicksilver) - Single 867 MHz (Quicksilver) - Dual 800 MHz (Quicksilver) - Single 800 MHz (Quicksilver 2002) - Single 933 MHz (Quicksilver 2002) - Dual 1 GHz (solo per Quicksilver 2002)

49 Domande Visualizza tutte

Wont boot, monitor wont boot either, black screen.

Mac Quicksilver G4 desktop, first wouldnt come out of sleep mode so I unplugged it, now wont startup at all. On/off button lights up then goes black, no sound, nothing.

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
Aggiungi un commento

1 Risposta

Risposta Più Utile

There is a CUDA button on the logic board to reset it. Use a pencil eraser tip to press it.

Scroll down on this to see photos of it:

https://www.justanswer.com/mac-computers...

Questa risposta è stata utile?

Punteggio 2

1 Commento:

Did not work and I also replaced the 3.6v battery as the old one was dead.

da

Aggiungi un commento

Aggiungi la tua risposta

Jean sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 2

Tutti i Tempi: 55