Salta al contenuto principale

Lanciato il 25 settembre 2015. Modello A1687/A1634. Si ripara in modo simile alle generazioni precedenti, richiede cacciaviti e strumenti di apertura. Versioni GSM o CDMA /16, 64, 128 GB / Oro rosa, Oro, Argento, Grigio siderale.

1041 Domande Visualizza tutte

Stuck in Bootloop before and after replacing battery

With my 6s+ the battery went from 90% to 1% and restarted itself over and over, and then wouldn't charge. I thought the battery was to blame so I replaced it. It worked good for a day and then its back to 1% and restarting. Now, its stuck in a boot loop were it will go between quickly flashing the backlight and flashing apple logo. Any ideas? Ive tried to restore but it doesn't stay on long enough.

Also, when I first opened the phone 6 months after buying it on eBay, the battery connector cover was missing. I read online it could be the battery sensor. Any ideas?

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
Aggiungi un commento

2 Risposte

Soluzione Prescelta

Try applying some pressure down on the connector while the phone turns on. If it works fine then you just need the metal bracket. If not then you might be missing some components near the battery connector which are commonly knocked off when preforming a battery replacement.

Questa risposta è stata utile?

Punteggio 1

1 Commento:

Thanks! Im going to have it replaced sometime this week.

da

Aggiungi un commento
Risposta Più Utile

I think you need the battery connector cover, the battery ribbon cable plug may have a loose connection to the battery connector on the board requiring that metal cover that goes over the battery connector and charging port connector.

iFixit sells the battery connector bracket here:

iPhone 6s Plus Battery Connector Bracket

Here is a guide in case you need it:

Sostituzione batteria dell'iPhone 6s Plus

Immagine iPhone 6s Plus Battery Connector Bracket

Prodotto

iPhone 6s Plus Battery Connector Bracket

$6.99

Questa risposta è stata utile?

Punteggio 2

2 Commenti:

Would this really solve my problem? Ive snapped both connects in tight and it still wont work.

da

If you have tried turning it on while applying pressure to the connection then it won't work.

da

Aggiungi un commento

Aggiungi la tua risposta

Michael N sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 194