iPhone 7 Touch ID doesn't work

Question

iPhone 7

Rilasciato il 16 settembre 2016. Modello 1660, 1778. Disponibile come GSM o CDMA / 32, 128 o 256 GB / Rose gold, gold, silver, black e jet black.

Rep: 1

4

5

Opzioni

Hey guys,

I've replaced an iPhone 7 Display (refurbished, original LCD), but after I powered the iPhone on, I couldn't add a fingerprint anymore.

The fault indication (that Touch ID has a failure) does not appear in the homescreen, but appears if I try to add a new fingerprint.

Homebutton (still the original one) and 3D are working without any problems.

Thanks in advance for your help.

Questa è una buona domanda?

Sì No

Punteggio 1

Ben @benjamen50 Rep: 159,8k Mtwo Perform 11 191 368 · Answer 1 · 2018-03-21T18:09:09-07:00

Risposta Più Utile

Rep: 159,8k

11

191

368

Opzioni

Usually it's due to the home button extension cable from the screen being faulty. You'll need to try another screen to confirm that.

Questa risposta è stata utile?

Sì No

Punteggio 2

2 Commenti:

Thanks, i tried another display but still no Touch ID. I used 80 degrees to get the glue off. Could it be too much and I damaged the Touch ID?

I do the same too. Don't heat up too close, too long and I heat up the glass side then the home button side a bit.