Salta al contenuto principale

iPhone con schermo da 4" introdotto nel marzo 2016 con specifiche hardware simili a quelle dell'6s. Disponibile in Argento, Oro, Grigio siderale, Oro rosa con 16 o 64 GB. Modelli A1662 e A1723.

1049 Domande Visualizza tutte

Always has "Could Not Activate iPhone" error

As stated above, it's getting this error every time you try activating it, either via local or iTunes activation. Various software resets etc have all been tried. CDMA based unit. Some techs suggested the SIM slot could be damaged. I'm looking for advice what the actual issue is called in the repair world, and if anybody knows a good tech to help with it locally in South Bay Area / San Jose, CA, or via mail order since it's somewhat more involved than a typical phone repair would be.

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 1
Aggiungi un commento

3 Risposte

Risposta Più Utile

Use 3UTools and check if the IMEI is being displayed on there. If it is not then the issue is related to the baseband circuit area which can only be fixed by microsoldering.

iPad Rehab should be able to help you out, not sure where they are located in.

Questa risposta è stata utile?

Punteggio 3
Aggiungi un commento

SOLVED!

I had the same problem just let your phone completely die until it gets to 0% and then charge your phone and then wait for it to turn on and it should be at your normal lock screen again and it should be working fine.

Questa risposta è stata utile?

Punteggio 1
Aggiungi un commento

Text copy replacement and email are waaaay tooooo smiiiiiiiiiiiiiilllllllllleee

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

Aggiungi la tua risposta

Matthew Hall sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 677