Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Il Motorola Moto G4 è il Motorola Moto G di quarta generazione. Numeri modello XT1625 e XT1622.

25 Domande Visualizza tutte

Soldering Temperature for Charge Port Replacement

Anyone know the temperature I should use for soldering the charge port on the motherboard? I purchased a soldering iron and it has a temperature control. I do not want it to be to hot as it will damage other parts and the board itself, then if it is to cold the solder connection will not hold.

The temp dial goes from 200-450 °C

Thanks

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 1
Aggiungi un commento

1 Risposta

Soluzione Prescelta

300°-350°C.

If you are careful you won't damage other parts near the charging connector.

As you may already know it's recommended to solder with a microscope, flux to make soldering easier, wick to remove excess / old solder.

I personally use a rework hot air station to remove charging ports while insulating surrounding components.

Questa risposta è stata utile?

Punteggio 4

Commenti:

Thank you very much. I do not have the equipment you do, but as long as I am careful I can get it. I have wick and other things. to remove the solder. Thank you again, I really appreciate it.

da

Aggiungi un commento

Aggiungi la tua risposta

William Michael Alford sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 5

Ultimi 7 Giorni: 29

Ultimi 30 Giorni: 131

Tutti i Tempi: 3,757