iPhone 6 Searching / No Service

Question

iPhone 6

Introdotto il 19 settembre 2014, questo iPhone con schermo da 4,7" è la versione più piccola dell'iPhone 6 Plus. Identificato dai numeri modello A1549, A1586, and A1589.

4994 Domande Visualizza tutte

Aaron Clarke @aaronclarke

Rep: 1

Postato: 7 gen 2018

Opzioni

iPhone 6 Searching / No Service

Hey, My 2 year Old IPhone 6 cannot seem to get any service I have tried the drop method which does work But only for a small period of time .The phone recognises when the sim is in or out of the phone ,I cannot get the imei number when I call *#06# But can get it in settings. The phone previously had problems with The Touch ID and Charge IC On the motherboard Randomly Breaking and not working but I got them repaired.If anyone has any idea what this is Please let me know ,

Thanks

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Sì No

Punteggio 0

Aggiungi un commento

3 Risposte

Soluzione Prescelta

Ben @benjamen50

Rep: 159,7k

Mtwo Perform

11

191

368

Postato: 7 gen 2018

Opzioni

This is an issue with the logic board relating to the baseband chip area. You will need to take it to a micro-solder to fix.

Questa risposta è stata utile?

Sì No

Punteggio 2

3 Commenti:

How does this Chip just break by itself for so many people and why does it sometimes work when dropped?

7 gen 2018 da Aaron Clarke

This occurs because most of the major chips on the logic board on iPhones are BGA mounted (ball grid array mounted) meaning they basically sit on an array of solder balls. Also the design of the phone is pretty thin.

This is vulnerable to bad solder joints that break with lead free solder and as you know the iPhone 6 frames bend too easily which can make this issue occur easily.

7 gen 2018 da Ben

For the OP...additionally, there are two copper traces underneath the Baseband IC that tend to crack from all of the drops, impacts, flexing and twisting. These have to be solidified.

7 gen 2018 da Minho

Aggiungi un commento

How does this Chip just break by itself for so many people and why does it sometimes work when dropped? — Aaron Clarke
This occurs because most of the major chips on the logic board on iPhones are BGA mounted (ball grid array mounted) meaning they basically sit on an array of solder balls. Also the design of the phone is pretty thin.

This is vulnerable to bad solder joints that break with lead free solder and as you know the iPhone 6 frames bend too easily which can make this issue occur easily. — Ben
For the OP...additionally, there are two copper traces underneath the Baseband IC that tend to crack from all of the drops, impacts, flexing and twisting. These have to be solidified. — Minho

nuhaalgebrti @nuhaalgebrti Rep: 1 Noha Al - Salami Communication Est · Answer 1 · 2018-01-07T09:51:57-07:00

Place the non-original chip (ie, a chip other than the bracket on which the device is locked) and connect the device to iTunes through a USB connector. When the device is detected by iTunes, back up and select Restore. (Try restoring without holding Shift / Option, or place the iPhone in DFU mode to do this.) After the restoration process, you will have two options: Restore from a backup and Setup iPhone as a new phone. Choose the second option. After selecting the second option, you must skip the activation steps. After the completion of the activation steps must appear (if nothing happens, repeat the steps)

Aaron Clarke @aaronclarke Rep: 1 · Answer 2 · 2018-01-07T10:49:59-07:00

Aaron Clarke @aaronclarke

Rep: 1

Postato: 7 gen 2018

Opzioni

Also, There is something thing loose inside the phone if that has to do with anything?

Questa risposta è stata utile?

Sì No

Punteggio 0

Aggiungi un commento

iPhone 6

iPhone 6 Searching / No Service

3 Risposte

Aggiungi la tua risposta