Salta al contenuto principale

Lanciato il 24 ottobre 2011 / processori quad-core Intel Core i7 da 2,2, 2,4 o 2,5 GHz

380 Domande Visualizza tutte

Mac wont start up, both fans spin for 2 secs, Sleep LED blinks once

last 4 of serial # DV7L

When trying to power up with power button :

- Mac starts

- Both fans spin for 2 sec

- Sleep LED blinks once

- all shuts off, cycle repeats without pushing power button on

Battery indicator full. When I unplug battery with adapter attached, Mac wont react at all.

Tried different RAMs, HDDs, SSDs. Reseting SMC, NVRAM, 20sec battery unplug - no luck.

Any of you guys had smth similar with POST ?

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0


Does the logic board show any signs of liquid damage?


Aggiungi un commento

1 Risposta

Risposta Più Utile

Disconnect the mag-safe, disconnect the battery. Press and hold the power button for 10 seconds. Reconnect battery, reconnect mag-safe and tell us if it booted.

Questa risposta è stata utile?

Punteggio 1


Tried it, disconnected Magsafe and battery, pwr button hold for 10sec. Reconnected Magsafe - fans spin instantly without pushing pwr button on. Pushing power button on, doesn't change anything.

No liquid damage visible.


It should have restarted spontaneously after doing that. Your repeated procedure is NOT the sequence I told you (what about the battery)?


tried it now, exactly as you suggested - no changes


I am at a loss on this one. I have never seen one that wouldn't boot with this method that didn't have liquid damage. Sorry, maybe @danj has an idea.


Aggiungi un commento

Aggiungi la tua risposta

Hubert H. sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 63