Rep: 93
3
12
iphone 6 error 4013.
I removed and reprogrammed nand but once the phone is returned the phone is not recognized.
I checked all pins under nand and condensers, line 3 volt and 1.8 volt and there are all.
The telescope without nand mass is not even detected.
What can I check?
connecting the cable phone I have 2.70 volts on battery connector
TRISTAR?
Questa è una buona domanda?
Rep: 14,9k
8
29
40
Sounds like you are on the right track with 4013 and reprogramming and reballing NAND...I would definitely try Tristar for the USB Voltage Charging issue...have you checked the VCC_Main and BATT lines for voltage check and caps around U2? If you reprogram NAND, Tristar (Tigris) would be a cakewalk and worth the check.
Questa risposta è stata utile?
hello, meanwhile thank you for the answer.
I also add that the phone is not recognized without nand
I checked the caps around the tristar (u2) and i have the 5 volt and the 3 volt and 1.8 volts.
At this point I exclude both the tristar and the trigris ... or am I wrong?
Now check vcc main and vcc batt and let you know ..
thank you
Solved !!!!! change tristar and restore :D
That's GREAT! Congrats! Good Job :)
@teetopp one moment .. ahahah but don't have serial number ...because?
No Serial number In Itunes?
Ultime 24 Ore: 0
Ultimi 7 Giorni: 0
Ultimi 30 Giorni: 1
Tutti i Tempi: 7,526
6 Commenti
i had 4013 on an iphone 6, but got if working without doing anything to nand. when doing a restore through itunes when the status bar appears on the phone unplug the cable and plug it back in straight away
da daniel
+1 from me. Trick worked on an iPhone 6s that no one else could solve
da Joshua Bell
+1 from me as well for the unplug and replug cable trick as soon as the status bar appears. Possibly Apple's way of getting customers to buy another tablet.
da Michael Hill
What status bar y'all talking about? I am getting the same error.
da fireflysean
Format the NAND with NAND Pro .
da oz.ozgur
Mostra 1 altro commento