Screen flickering but stops when pressure applied!

Question

iPad Mini 2 Wi-Fi

Guide per la versione Wi-Fi dell'iPad Mini 2. Annunciato il 22 ottobre e introdotto il 12 novembre 2013. L'iPad mini 2, noto anche come iPad mini con Retina Display, ha tutti i pixel dell'iPad Air in un più piccolo fattore di forma da 7,9"

220 Domande Visualizza tutte

K Raeburn @kendo44

Rep: 11

Postato: 26 set 2017

Opzioni

Screen flickering but stops when pressure applied!

Hi there,

iPad 2 mini was dropped (whilst in a child’s rubber protective bumper case) and although no visible damage on switching on the screen has lines flickering up it rapidly almost like tv intereference. This stops when pressure is applied just above and to the right of the home button, but reoocirs when pressure is released.

Is this a digitiser issue?

Any help appreciated.

Thanks

Kendo44

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Sì No

Punteggio 0

Aggiungi un commento

2 Risposte

Soluzione Prescelta

joel rakich @ripper

Rep: 257

4

1

Postato: 26 set 2017

Opzioni

The digitizer usually only affects the touch function, the LCD is what shows picture so it kinda sounds like thats what your having an issue with if the picture is distorted or irregular. Also where you are putting pressure happens to be about where the LCD plugs into the logic board. There is usually a metal shield over that connection to prevent it from coming loose so its tough to say what happened for sure until you open it and look under that shield. If everything is connected properly you may need to replace the LCD.

Questa risposta è stata utile?

Sì No

Punteggio 0

2 Commenti:

I thought that the area where pressure was being applied might be near a socket so thanks, I will open it and see if something is loose and then if required replace the screen.

Thanks again

26 set 2017 da K Raeburn

Is it repaired cause same happend to my air 4 when I apply pressure to a certain area my ipad screen turn black until I stop

11 ott 2021 da Sussy baka Uff

Aggiungi un commento

I thought that the area where pressure was being applied might be near a socket so thanks, I will open it and see if something is loose and then if required replace the screen.

Thanks again — K Raeburn
Is it repaired cause same happend to my air 4 when I apply pressure to a certain area my ipad screen turn black until I stop — Sussy baka Uff