My MacBook Air 2011 model shuts down after few seconds.
Then I have to wait for an hour or two to get it started again, then again the same thing happens!
I tried all the PRAM, hold power button tips. When I remove the battery and turn it on with charger hooked, only the fan starts and not the display.
Please help! As I have my exams coming ahead.
Questa è una buona domanda?
Rep: 41k
15
78
89
Has it ever been liquid damaged?
EDIT: I'd try to use the laptop with battery disconnected. If issue is solved, replace battery.
IF this issue still happens both with battery connected and disconnected, then I suspect a few things, all of them at board level:
Of course there are other possibilities but I'd rule out the above first.
You'll need proper micro-soldering tools and replacement chips and enough skill to perform all of the above except if it's the I/O which is an easy to reach part that can be easily replaced.
Questa risposta è stata utile?
IFIXIT guide to replace I/O Board: MacBook Air 13" Mid 2011 I/O Board Replacement & MacBook Air 13" (Mid 2011) I/O Board - Apple P/N 922-9963
Ultime 24 Ore: 0
Ultimi 7 Giorni: 1
Ultimi 30 Giorni: 2
Tutti i Tempi: 9,316
4 Commenti
There is no history of liquid spill or damage. Which one should i try doing first?
da Manoj Kumar
I would do the I/O board
da Dan
Manoj Kumar, I am assuming this is happening both with charger connected and disconnected?
da Rany
Rany, yes. It works perfectly for a few seconds, then everything goes blank. I tried to run it wothout battery, just on charging cable. It looks like its working without the display i.e the fan starts spinning and stays on until the chrarger is disconnected.
da Manoj Kumar