Frame will not boot up; blank white screen.

Question

Kodak Pulse Digital Frame

Sandra Kimball @onalaska

Rep: 25

2

1

Postato: 4 lug 2017

Opzioni

Frame will not boot up; blank white screen.

My Kodak Pulse Digital Frame has quit working and I really don't want to replace it. The first stage: it froze on one picture. I unplugged the device and it rebooted. When I pushed the check it button, the frame was able to connect to the internet, but would keep recycling after showing "downloading 5 of 2364 pictures". I tried unplugging it again and now it won't do anything, just a white screen. Does anyone know how to fix the Kodak Pulse? It is out of production and irreplaceable.

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No

Punteggio 1

Aggiungi un commento

4 Risposte

Sandra Kimball @onalaska Rep: 25 2 1 · Answer 1 · 2017-07-05T13:57:40-07:00

Risposta Più Utile

Sandra Kimball @onalaska

Rep: 25

2

1

Postato: 5 lug 2017

Opzioni

Good news! I was able to fix my frame by replacing the power cord. If anyone has this issue that is a first step to correct.

Questa risposta è stata utile?

Sì No

Punteggio 1

Aggiungi un commento

Jon McKown @restlesspirit Rep: 1 · Answer 2 · 2017-11-08T10:13:49-07:00

Jon McKown @restlesspirit

Rep: 1

Postato: 8 nov 2017

Opzioni

Unplug the picture frame. While depressing both buttons on the back , plug it back in and hold buttons until it restarts.

Questa risposta è stata utile?

Sì No

Punteggio 0

1 Commento:

I had already done that step. I did manage to buy a replacement plug and the frame worked for a while, but then the ability to upload photos or email photos all failed. It is now a USB only frame and has been replaced with a Nixplay which I love!

8 nov 2017 da Sandra Kimball

Aggiungi un commento

Adrian Bruder @adrianbruder Rep: 26 1 1 · Answer 3 · 2018-01-24T02:32:10-07:00

Adrian Bruder @adrianbruder

Rep: 26

1

Postato: 24 gen 2018

Opzioni

I had this problem or part of it...the white screen.

When it displays the white screen or gets frozen: unplug power, leave for at least 1h.

Plug power and leave for 10 minutes or so. Press the Start button for 2 seconds only , frame should start.

If it starts again with white screen : unplug, leave for 10 minutes. Plug back in and press AT THE SAME TIME both Check and Start buttons, this will reset the frame and you have to set it up again.

If nothing works : with the frame plugged in but off press with a plastic stick through the hole located lower than the Check button, press for 2 seconds then wait. After that press AT THE SAME TIME both Check and Start buttons, this will reset the frame and you have to set it up again. Hope some of this will work for you. Regards, Adrian

Questa risposta è stata utile?

Sì No

Punteggio 0

1 Commento:

I have tried numerous times and my frame still cannot start. Can you please tell me whereabout the ‘check’ button? Thank you

16 giu 2020 da Yn Chan

Aggiungi un commento