Marks on display after separating glass

Question

iPhone 6

Introdotto il 19 settembre 2014, questo iPhone con schermo da 4,7" è la versione più piccola dell'iPhone 6 Plus. Identificato dai numeri modello A1549, A1586, and A1589.

4994 Domande Visualizza tutte

Mirek @mircek

Rep: 25

1

Postato: 4 giu 2017

Opzioni

Marks on display after separating glass

Hello

I have a question for people with more experience in LCD separation. Look at the picture in the second link below - there are several marks on a display of an iPhone 6 I have not encountered before, red line and dark spot.

The display was broken after a fall. Here is a picture before separation:

http://imgur.com/a/Lmege

And here is a picture after separation:

http://i.imgur.com/2uC0v37.png

There were none of those marks before glass separation so I am wondering if this could happen because of an unprofessional separation or is it possible that it just somehow was not visible before (with glass on a display)?

According to the technician words, the dark spot on the bottom right side marks a place when the display is a bit bent - which was not visible with the glass glued on top of the display.

Thank you in advance

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Sì No

Punteggio 2

Aggiungi un commento

1 Risposta

Soluzione Prescelta

Reece @reecee

Rep: 34,8k

eFix Ltd (UK)

8

52

62

Postato: 4 giu 2017

Opzioni

Vertical red line looks like it is on the polariser film you have fitted (they have protective films you remove), along with the black/grey circles. The dark smear in the bottom right is probably where liquid has leaked into the backlight (when you were cleaning the glue), but it is difficult to tell from picture.

Questa risposta è stata utile?

Sì No

Punteggio 5

4 Commenti:

So it means that the technician made possibly something wrong? I was not separating the display, this picture is the only one he sent me.

4 giu 2017 da Mirek

Yes. Tell him to remove the protective film from both sides of the polariser. Smudge is probably backlight panel, when he cleaned the glue it has leaked inside.

4 giu 2017 da Reece

Thank you. Your explanation with leaked glue sounds more credible than his argument with a bent digitizer. Or is it possible that digitizer could bend after a drop? I believe it would break, not bend.

4 giu 2017 da Mirek

A bent digitiser won't cause that mark, it is where the liquid from cleaning the old glue has leaked into the right side. Most likely the digitiser would break anyway, like you have said

4 giu 2017 da Reece

Aggiungi un commento

So it means that the technician made possibly something wrong? I was not separating the display, this picture is the only one he sent me. — Mirek
Yes. Tell him to remove the protective film from both sides of the polariser. Smudge is probably backlight panel, when he cleaned the glue it has leaked inside. — Reece
Thank you. Your explanation with leaked glue sounds more credible than his argument with a bent digitizer. Or is it possible that digitizer could bend after a drop? I believe it would break, not bend. — Mirek
A bent digitiser won't cause that mark, it is where the liquid from cleaning the old glue has leaked into the right side. Most likely the digitiser would break anyway, like you have said — Reece

iPhone 6

Marks on display after separating glass

1 Risposta

Aggiungi la tua risposta