Salta al contenuto principale

Lanciato il 25 settembre 2015. Modello A1687/A1634. Si ripara in modo simile alle generazioni precedenti, richiede cacciaviti e strumenti di apertura. Versioni GSM o CDMA /16, 64, 128 GB / Oro rosa, Oro, Argento, Grigio siderale.

1041 Domande Visualizza tutte

iPhone 6S Plus Main Camera, 3D touch and flash light Not working

I have an iPhone 6S Plus with some issues. Main Camera and 3D touch Not working at all, flash light Not Working too. I checked the motherboard and I see sigh of water damage but everything else works fine. Do I need to replace any IC to solve this issue? What parts do I need to inspect with the microscope and test? Maybe some parts (like Resistors, Capacitors or IC) burned. I would appreciate your help. Thank you!!!

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
Aggiungi un commento

1 Risposta

Soluzione Prescelta

Clean the board and replace any bad components.

Questa risposta è stata utile?

Punteggio 2

6 Commenti:

I cleaned the motherboard, how can I find the bad parts; I can't see any clear damage with the microscope. What parts needs to test with the multimeter; maybe a chip needs replacement or some resistors-capasitors-filters

da

Are any components blackened/burnt?

da

I don't see any black components near the main camera connector

da

What about pins on the connector? Are those burnt a little?

da

no, seems it is ok. I think the problem is on the camera chip.

da

Mostra 1 altro commento

Aggiungi un commento

Aggiungi la tua risposta

johnfl21 sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 196