Salta al contenuto principale

Model M6497 or A1005 / 500, 600, 700, 800, or 900 MHz G3 processor

117 Domande Visualizza tutte
Domanda Chiusa

Processor

Is it possible to exchange the Processors from a Logic Board that has a 500MHz Processor on it with a 700MHz Processor

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
Aggiungi un commento

2 Risposte

Risposta Più Utile

Hi! Unfortunately, no, it's not possible, because the processors are not plug-and-play, and are instead connected directly to the logic boards. It may be possible if you are an expert at soldering, but even then it would be a very involved and risky procedure, likely ending in the boards being destroyed and unusable.

Considering iBook G3 parts machines can be had for $20 these days, I'd go that route in order to get a faster board.

Questa risposta è stata utile?

Punteggio 1
Aggiungi un commento

Ok thanks the reason why I was asking is because I have the Graphics issue on the 700MHz on that I have and so far nothing is working to fix it

Questa risposta è stata utile?

Punteggio 0

1 Commento:

I hear ya. Unfortunately there is really no permanent fix for the iBook G3 video issue. Coleen Thompson (one of the people who answers questions on this site) posted a link to an eBayer who does soldering to fix the issue, and he may do a good job, but generally soldering of this sort comes undone eventually, and you can practically buy a working replacement machine or at least a working board for the cost of the procedure.

da

Aggiungi un commento
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 6

Tutti i Tempi: 869