Rep: 263
3
2
1
Macbook pro 13" mid 2014 works on external monitor but nothing on the retina display. The edges of the screen show white light. It blinks when it boot. I checked the connector and cable, they seems to be fine. Any idea?
Questa è una buona domanda?
Rep: 34,8k
8
52
62
Common issue on 13" Retinas, usually randomly happens or when it is knocked, and causes no picture or a black screen.
Reconnect the LCD cable logic board side first, since this usually resolves the issue (disconnect battery of course). If this doesn't work, reconnect it screen side, watch from 5:23 here https://www.youtube.com/watch?v=ZLNUjeUL...
If it is still not showing picture, try a new LCD cable. Check the screen board for liquid damage, and then the logic board if there is still no luck with this, but a reconnect should fix it.
Questa risposta è stata utile?
Yeah reconnect both sides and does the trick.
Rep: 459
7
13
I think it's not the connector on the logic board but the connector from the lcd. You can try to reconnected the lcd cable. It's under the black clutch.
Questa risposta è stata utile?
Is there a tutorial for it? Correct me if I'm wrong, you can't replace that cable on Mid-2014 model.
I think it's possible but no tutorial. It is not that hard , ones you removed the display assembly you can open the clutch by sliding
Ultime 24 Ore: 0
Ultimi 7 Giorni: 7
Ultimi 30 Giorni: 14
Tutti i Tempi: 487
