Salta al contenuto principale

Lanciato a giugno 2012. Modello A1278. Processore Intel con Turbo Boost. Fino a 512 MB di RAM Video DDR5

1624 Domande Visualizza tutte

Broken iSight cable (pulled out of connector)

I pulled the wires out of the iSight camera cable at the logic board the connector is still in place I just pulled the cable out of the connector. How do I fix that?

MacBook Pro (mid-2012) 13"

Thank you

Update (03/09/2017)

Picture

Block Image

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 4
2 Commenti

Could you please send photo

da

Uploading a picture

da

Aggiungi un commento

4 Risposte

Soluzione Prescelta

you need to replace the entire webcam with cable, which is difficult because you need to take of the entire display assembly and then separate the glass from the rest of the toplid.

Questa risposta è stata utile?

Punteggio 1

7 Commenti:

Ya I'm good on all that I don't need the camera that bad

da

You might want to use tweezers to push the broken connector out of the socket though. On some years it causes an issue with sensors, so the fan spins high speed

da

issues with fans are only when temp sensors are disconnected.

da

Fan is good I monitor it also with temperature of the CPU

da

On a good note it's only reaching 63 degrees C under heavy load.

da

Mostra altri 2 commenti

Aggiungi un commento

What are the effect of a broken isight camera cable on macbook 2012 pro …apart from camera….

I need answers thats based on sensor, relation of display back light

Questa risposta è stata utile?

Punteggio 1

2 Commenti:

i also wanna know.. because my computer suddenly cant find the wifi..

da

same situation here. Tore out the socket and was wondering if I really need to fix it.

da

Aggiungi un commento

I have been using it without the connector for the past 1 year. All I notice for the difference is no more camera and mic is not working for me. I'm wondering if the mic has to do with the isight port or my mic just coincidence to breakdown at the same time. The rest like fan and sensors was not affected at all. I'm using a A1278 MBP.

Questa risposta è stata utile?

Punteggio 1
Aggiungi un commento

Hi Guys i have the same problem on macbook pro 13 late 2011 and I cant find a way to remove the connector. Any ideas please because thats must be the reason that my fan works like crazy. Appreciated any help!!

Block Image

Questa risposta è stata utile?

Punteggio 0

1 Commento:

That 's so hard to get it out. I using the cuter . Look at the side of socket. You found the space between the plug. So using the blade insert between that and Try to push the socket out. Please try the both side left and right. Until the socket going out.

da

Aggiungi un commento

Aggiungi la tua risposta

Collin.nesbitt@gmail.com sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 15

Ultimi 30 Giorni: 41

Tutti i Tempi: 7,279