Aggiusta la tua roba Comunità Store

Apple released the slimmed-down, buffed up iPad Air on November 1, 2013 in a choice of Space Gray or Silver. It packs the custom A7 processor and ships in 16, 32, 64, and 128 GB configurations.

577 Domande Visualizza tutte

Opzioni

smart cover lock ipad from back side

Hi, I have a problem after replacing the touch the iPad Air crashes even when I stretch in the back the Smart Cover, I thought it was because I no longer have the original home button. But I tried to connect only non-touch lcd and no home button and the problem remains, the iPad will block even when the cover and lying in

The back. I don't know how to fix it. Everyone says that both the home button but I don't think

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 1

3 Commenti:

Just dont use the smart cover.

da

Very kind to reply. But I'd be curious to understand then I issue

da

Not sure sorry

da

Aggiungi un commento

1 Risposta

Filtra per:
Più utili Più recenti Più Vecchio

Opzioni

Most likely the home button. Something similar happens on the iPad Air 2. It has a small patch with 4 points that you have to solder off and solder on to the new digitizer/LCD assembly. Otherwise the Smart Cover won't work.

You could troubleshoot it by disconnecting the home button and then run the Smart Cover on the back of the iPad. If it still shuts off then it could be caused by the magnets on the side under the edge next to the LCD. But as said, most likely the home button.

Questa risposta è stata utile?

Sì No
Punteggio 0

2 Commenti:

But where are the magnets? For that the screen comes off even without the home button plugged in so I think key is not the problem

da

If I remember right, they are under the edge of the chassi.

da

Aggiungi un commento

Aggiungi la tua risposta

Luca Ciclisti sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 3

Tutti i Tempi: 462