Aggiusta la tua roba Comunità Store

Opzioni

I replaced the carburettor and now it won't crank

I bought this scooter and it was running fine first couple days then it started flooding out worse each time I rode it. I took the carburettor off and was going to check the float when I notice the housing on the carburettor where the float is was cracked. I guess the last owner tighten the screw down to much to crack the housing. This gave me reason to buy a new one. I put the new one on and now I can't get it to crank

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 0
Aggiungi un commento

1 Risposta

Filtra per:
Più utili Più recenti Più Vecchio
Risposta Più Utile

Opzioni

Hi,

Here is a link to the service manuals for Jonway cycles. Select your particular engine and download it. Hopefully it will help you solve your problem.

http://www.carlsalter.com/jonway-service...

Questa risposta è stata utile?

Sì No
Punteggio 2

2 Commenti:

Thank you this was very helpful but in still having trouble this manual does not show how the fuel lines are run or the vacuum lines

da

Hi, Are the diagrams in this link any good top you?

http://mechanics.stackexchange.com/quest...

da

Aggiungi un commento

Aggiungi la tua risposta

Jason sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 3

Tutti i Tempi: 106