Rep: 13
1
I want to replace my dumb iPhone 5c's battery. I pry up the screen using the iSclack, but only the screen comes up with it, and not the digitizer. It seems like Apple didn't glue the digitizer properly, since my phone is a little pried up from the top ever since I bought it.
What can I do to remove the digitizer along with the screen?
Questa è una buona domanda?
Rep: 57,5k
18
77
212
The 5C doesn't have a home button cable, attached to the Lightning dock. Honestly I never use a suction cup anymore. The spudger is a good tool, or you can use a flat head screw driver. Make sure to pry from the bottom right, so as not to disturb the two gold pins, on the Lightning dock
Questa risposta è stata utile?
Rep: 175
3
You Probably Have Screen Separation Witch Is Screen Defect Or User Error It Should Come Off As One Just Be Carful Not To Rip Home Button Cable
Questa risposta è stata utile?
You Kinda Just Got To Play Around With It Do You Have Picture Of It
Good Tool For Getting Screen And LCD Off
I'll edit my question
I edited my question with the image
Did You Take Out The Penelope Screws At The Bottom By The Charging Port?
Ultime 24 Ore: 0
Ultimi 7 Giorni: 1
Ultimi 30 Giorni: 1
Tutti i Tempi: 130
1 Commento
Did you remove the screws from the bottom of the case as mentioned below It wont come out if you dont
da Jimfixer