I took apart my iphone 5 to clean the power button, upon putting it back together I think some cat dander got in the contacts of the internal connections. Tried blowing them off with compressed air, drying it out for a day. many things wont work, like phone wont ring, camera wont work right, etc. Whats the best way to clean the connectors? Is there a brush I can get?
Questa è una buona domanda?
Rep: 102,5k
18
191
304
In cleaning contacts or logic boards I use IP alcohol at 90+% mix and a soft tooth brush . You mentioned using compressed air . Is this from a can or from an air compressor. if its from an air compressor you may have put moisture into the contact inadvertently as compressors tend to pull moisture from the air then blow it out . Using the IP alcohol will help with any corrosion and moisture accumulated on the contact . also check the contact for broken prongs . Use a magnifying glass to inspect it. Hope this helps
Questa risposta è stata utile?
Ultime 24 Ore: 0
Ultimi 7 Giorni: 3
Ultimi 30 Giorni: 5
Tutti i Tempi: 58
1 Commento
just use a toothbrush for cleaning. Soft head.
da patrick