My grandson's 3ds will not charge. It isn't the cord and we're thinking the problem is with the charging port. We have to kind of prop the cord when it's plugged in so the cord will stay in place. How can we fix this?
Questa è una buona domanda?
Rep: 223
4
1
Juanita,
My suggestion in this order:
1. Try with a new battery
2. Check fuses, if in short it will not charge
3. Check power supply connector. Re-solder or replace if required.
4. Check all connectors for lcds, cameras, wifi card are in place and not broken.
Good luck and good repair....
JM - Montreal
Questa risposta è stata utile?
Rep: 1,2k
7
5
1
It sounds as though the charge port pins have been pushed down into the plastic guide. It's pretty easy to lift them back up. All you'll need is a needle to get underneath the pins and pry them up a bit. Take a look at this image for a slightly better visual example: Lifting Charge Port Pin with Needle
If that doesn't help charge the system then the charging port has probably lifted off the PCB and will need to be resoldered back onto it. Try out the above first (needle trick) and get back to us if it helps.
Questa risposta è stata utile?
Here try this Youtube video:
Questa risposta è stata utile?
Ultime 24 Ore: 0
Ultimi 7 Giorni: 1
Ultimi 30 Giorni: 3
Tutti i Tempi: 1,041
