Salta al contenuto principale

Modelli A1419 / Fine 2012 / Processori 2.9 & 3.2 GHz Core i5 o 3.4 GHz Core i7, ID iMac13,2

330 Domande Visualizza tutte

4sns 1 c0000008 tl0p 124

Hi I am getting 4sns 1 c0000008 tl0p 124 hard test error. The CPU usage over 400%

Update (08/24/2016)

I have changed the hard drive and bought owc cable + sensor as u adviced

Update (08/24/2016)

ok thanks a lot Mayer jan ( SSD upgrade and kernel_task )

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 1
2 Commenti

Did you change the hard drive?

da

I thought I recognized you. Let's delete this question and go back to the original. There was a months lapse between what I advised and your response and I missed it.

da

Aggiungi un commento

4 Risposte

Soluzione Prescelta

The problem was with the LCD sensor, no hdd sensor need for kernel_task problem. The HDD sensor is only for fans.

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

Is the fan running fast and making very loud. If so, you make to reorient a wire. It is either a heat senser or fan sensor wire.I don't remember the exact name. It has white dot on the conector. You need to turn it 180* from how it was before installed your new hard drive. Infix it has a very good guide that explains it.

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

There is a sensor cable on some iMac models that must be attached to the replacement HDD for the fans to operate normally. I do not recall if the particular models include your mid-2010 iMac but the symptom you describe would be consistent with this requirement.

If you did not buy it from OWC / MacSales or other well-known Apple supporter, it is unlikely to have the required hardware.

Check with OWC to determine the correct replacement you require.

It's an issue in your lower slot

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

Has anybody solved this mysterie ??

I have the same behaviour:

4sns 1 c0000008 tl0p 124

And a kernel tast taking 300% CPU load

Questa risposta è stata utile?

Punteggio 0

1 Commento:

You may find using this app will help in locating which sensor is failing: TG Pro See what it shows you.

da

Aggiungi un commento

Aggiungi la tua risposta

Vardan Hovsepyan sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 2,044