Salta al contenuto principale

Power light continous green LED flashing for +/- 5 seconds, tv "dead"

Power LED when switching ON, flashes continuously GREEN for about 5 seconds and then steady GREEN LED - and no display on the screen - blank /"dead".

Under normal conditions, the GREEN LED will flash for about 3 seconds then "flip-flop" to RED status, i.e: TV is now in "standby" mode.

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
Aggiungi un commento

1 Risposta

Locate the DG Board (Audio) and re-solder the DG Board connector pins of both power supply connector from the main Power Supply Board.

A "dry joint" was not allowing theDG board to fully 'diagnose and reset' on Power On...

( In my case the DG board was the TNPA4311 )

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

Aggiungi la tua risposta

jotburke sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 118