Opzioni

After water damage no function but board seems working.

Hi guys,

I am repairing an iPhone of a friend and I now faced a problem I'm not familiar with.

Short version:

Phone remained in a jacket outside during rain. Since then no function. I opened up the phone but there was no corrosion visible. I put the board into my iPhone 6 and run it. Since it turned on the board should be okay.

I tried to find defect parts by exchanging them. I put a new battery, power button cable, lightning dock cable and volume buttons cable in. But still no reaction. Neither by pressing the power button nor by plugging in the USB cable. Even iTunes keeps silent.

Does someone of you know any component that be causing the defect I not exchanged, yet? Or could the housing cause the problem? I'm like 404...I'm thankful for every further idea :)

Chris.

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Sì No

Punteggio 0

Aggiungi un commento

Postato: 9 giu 2016

Opzioni

If you have access to another phone as you say you tried the board in another phone try testing the display. Water damage is not restricted to the board .

Questa risposta è stata utile?

Sì No

Punteggio 1

3 Commenti:

Oh I didn't mentioned but as I switched the board I also used the display of the "damaged" phone. The display should be okay as well.

9 giu 2016 da chris9211

so the display and the logic board both worked in another phone? connected together in that phone?

9 giu 2016 da Jimfixer

yes. both worked in my phone.

9 giu 2016 da chris9211

Aggiungi un commento

iPhone 6

After water damage no function but board seems working.

1 Risposta

Aggiungi la tua risposta