Salta al contenuto principale

Fan connector socket broken

Hello, so I was cleaning my ps3 and when I tried to pull the fan connector from its socket, the socket came up with it too. The socket was attached to the motherboard. Is it possible that I attach it back somehow? Soldering will work?

(I tried to place the socket in its place and then just put some tape on it to keep it in place but fan won't turn on.)

First image shows where the socket was attached.

Block Image

Second image is the socket from beneath.

Block Image

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio -1
Aggiungi un commento

1 Risposta

Risposta Più Utile

It looks like you have torn the pads off the board, so there is nothing to solder the connector back on to. You would need to find where those pads go to on the board, expose some of the copper trace, and run a jumper from the connector to those points. You need good soldering skills and equipment for this work.

Questa risposta è stata utile?

Punteggio 1
Aggiungi un commento

Aggiungi la tua risposta

Chris sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 129