Right side of the headphone is not working..!
Both the phase and ground wires are at the correct position and soldered well...but its not working..why..?
Questa è una buona domanda?
Punteggio
2
255022
1 Risposta
Rep: 782,5k
1,1k
893
2,3k
Dino Ram, you must do a continuity test from the jack to the driver. If that checks out ok, you may have a bad driver (speaker). If it does not then it is possible that this is caused by a bad jack (connection).
Questa risposta è stata utile?
Punteggio
0
Any other cases
Yes ever wire is properly soldered
da abhiom27