Aggiusta la tua roba Comunità Store

La versione con solo il Wi-Fi dell' Apple iPad Air, numero modello A1474. Disponibile nei colori grigio siderale e argento, ha un processore A7 custom ed è disponibile con memoria da 16, 32, 64 o 128 GB.

299 Domande Visualizza tutte

Opzioni

ipad air LCD not turning on after digitizer replacement

hello , i got the same problem with my i pad air 5 where screen stays black after digitizer replacement. funny thing my battery was disconnected during replacement. any ideas?

i tried reseating clips, home button and off button hard reset old digitizer also not working.

I pad is detected by iTunes and when i connected the charger the charging sound keeps beeping continuously. please advise

Update (09/15/2015)

I think I found the problem. does any one know what this part is called and how to go about it. my soldering skills are rubbish. is it a fuse of some kind. how could this have happened if I was wearing static band and battery was disconnected.

Block Image

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 1
Aggiungi un commento

1 Risposta

Filtra per:
Più utili Più recenti Più Vecchio

Opzioni

The backlight filter is possibly blown. I have run into on either a mini or an ipad air, I don't remember which, a situation where I thought I had killed the backlight filter but it tested good so I put a different lcd on it and it worked. After that, I put the original lcd back and it worked fine. I never did figure out what was screwed up but it may be worth giving a try.

Gotta try the easy fixes before chasing after the board work so try a different lcd first. Maybe even disconnect the battery and let it sit for 30 minutes or so disconnected and come back to it. They're finicky.

Questa risposta è stata utile?

Sì No
Punteggio 0
Aggiungi un commento

Aggiungi la tua risposta

frankmasiko sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 5

Tutti i Tempi: 610