Aggiusta la tua roba Comunità Store

iPod Classic 6th Generation. Model A1238 / 80, 120, or 160 GB hard drive / black or silver metal front

904 Domande Visualizza tutte
Domanda Chiusa

Opzioni

How do I replace the battery connector?

I was replacing my HDD and I pulled too hard on the battery connector while removing the battery cable. The connector came off along with one of 5 metal pieces attached to the logic board. I know I'd just have to solder it if the metal piece (I think it's called a pin) was still there. Is it still fixable without it, or will I just have to get a new logic board?

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 0
Aggiungi un commento

1 Risposta

Filtra per:
Più utili Più recenti Più Vecchio
Risposta Più Utile

Opzioni

You can buy the connector on eBay for like 7 bucks. You need a good soldering iron to do the job or take it somewhere that does repairs.

Questa risposta è stata utile?

Sì No
Punteggio 2

2 Commenti:

Would I have to do something about the stripped connector on the motherboard, or can I just solder it straight on?

da

Remove the pins and the solder the legs that come with the connector.

da

Aggiungi un commento
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 389