Salta al contenuto principale

Sesto modello di iPhone Apple, annunciato il 12 settembre 2012. La riparazione si fa in modo simile alle precedenti versioni di iPhone e richiede cacciaviti e strumenti di apertura. Disponibile con tecnologia GSM o CDMA, con 16, 32, o 64 GB, nero o bianco.

2522 Domande Visualizza tutte

iPhone 5 boot loop

I have an Iphone 5 that had minor water damage. But was all cleaned out and was working great.

Then a few week later it was bent (as seen in picture) when plugging it in the apple logo appears for about 4 seconds then the phone shuts of are repeats the process. Then I tried to put the phone into recovery mode to update or restore to phone and i got the error code 21. So I opened it up to find a broken component on the board (as seen in the picture). And i need to know if it is replaceable and what it is.

Block Image

Block Image

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 2
Aggiungi un commento

4 Risposte

In the picture, are you talking about that piece near the bottom middle of the board w/ a white circle? If so, that's an inductor. These are specs for it 2.2UH-20%-1.45A-125MOHM if you can find one.

How did you clean it out? And did you remove the shields too to check for any damage?

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

Try a new battery that has a charge first.

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

I have this same problem . The Apple logo appears for 10 seconds. I replaced the battery and the same thing happens. I do not think I had any water damage but it is possible. Any thoughts, anyone?

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

Hi, anyone knows the exact name of the L2 component?

Thanks

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

Aggiungi la tua risposta

Ryan Ferris sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 5

Tutti i Tempi: 488