Rep: 13
1
I bought a new battery and having a VERY difficult time pushing the connector of the battery all the way into the port on the mother board. The original battery didn't have a problem. Am I doing something wrong? Shouldn't the lip of the port and the "ledge" around the battery be flush?
Questa è una buona domanda?
Rep: 41k
15
78
89
Examine the battery connector tip. Does it have any issue such as any bent prongs that prevent the connector from sitting in place?
Also, are you sure you got the right battery model?
Questa risposta è stata utile?
When I looked at the connector tip, it only has holes for prongs to go in. I didn't see anything wrong. And, I was able to get it to connect (Mac is saying it is charging) but after pushing really hard. It still doesn't fit flush though. And, I bought 2 of the same batteries, and both are really difficult to push in. So, I am guessing nothing is bent. Also, the batteries have the same model number on them that my original one has.
Here's the battery that I bought:
http://www.amazon.com/gp/product/B00MLSK...
I did contact the supplier and they are sending me out another one, but I am thinking this is a design issue that they have not resolved.
Seems like others reported similar issues. Must be a design flaw.
Ultime 24 Ore: 0
Ultimi 7 Giorni: 0
Ultimi 30 Giorni: 4
Tutti i Tempi: 111
