Salta al contenuto principale

iPod Classic 6th Generation. Model A1238 / 80, 120, or 160 GB hard drive / black or silver metal front

904 Domande Visualizza tutte

Why is my iPod stuck on the "HP dectect test" screen?

I was following ifixit steps to check the functionality of the hold button (diagnostic). The hold button is working fine (0 and 1). But now my screen is stuck on HP Detect : 0. It says press menu to continue, but when I press menu nothing happens. I have also tried pressing menu twice and several other combinations...

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 10
1 Commento

—me to. have no idea why. it reboots fine -wasn't doing this a week ago.

da

Aggiungi un commento

6 Risposte

Risposta Più Utile

Plug in the headphones (HP).

Questa risposta è stata utile?

Punteggio 7

2 Commenti:

...........Hmmmmmmmn? Something about hindsight, and 20x20 eyesight....?!

Thanks!

da

so i should put my HP laptop away ?

da

Aggiungi un commento

need to unplug it and then push MENU

Questa risposta è stata utile?

Punteggio 1
Aggiungi un commento

i plugged the earphones. it says now hp detect : 1 menu to continue. i pressed menu but it does not continue.. can you please help?

any clue please e mail me at bernard_khoury@hotmail.com

Questa risposta è stata utile?

Punteggio 0

4 Commenti:

just take out the headphones and press the menu button then BINGO!!!

da

Now it says 'Accessories Test'

FW_DETECT = 0

USB_DETECT = 1

Please plug FW

What's this mean????

da

Firewire (FW) connection vs USB connection:

https://discussions.apple.com/thread/275...

da

Turn off hold button

da

Aggiungi un commento

If it's not continuing, it didn't pass the headphone (HP) test. Ipods have a little detector that stops the ipod if a headphone isn't detected; it'll pause the song if the headphone jack is removed.

You might want to disassemble it and replace the headphone jack. If that doesn't work, it's probably a bad board.

Questa risposta è stata utile?

Punteggio 0

1 Commento:

after plugging it in, unplug it, then it should continue

da

Aggiungi un commento

I got mine to go to the next stage by clicking the hold switch on and then off.

Questa risposta è stata utile?

Punteggio 0

1 Commento:

Now it's stuck on FW DETECT : 0

There's no Firewire to plug in, so I can't test this.

da

Aggiungi un commento

Hello there. I have tried out a solution you your little problem here which was posted by Chi. You see, (HP) is abbreviated for Headphones, which is dumb but oh well, and it worked when my Headphones were plugged in and then unplugged.

Questa risposta è stata utile?

Punteggio 0

1 Commento:

didn't work for me.

da

Aggiungi un commento

Aggiungi la tua risposta

alysont1 sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 38

Ultimi 30 Giorni: 179

Tutti i Tempi: 28,475